BaddJet Home

Aftermarket thermostat, pressure regulator, cooling solenoid

UIM · Cooling

Aftermarket thermostat, pressure regulator, cooling solenoid

UIM answers this part for 24 of its classes. 16 of those answers are permissions, with or without limits attached, and 8 are not. 8 are inherited from a parent class the rulebook points at.


Where it stands, class by class

24 classes, grouped by the answer rather than listed one by one, because an answer that holds for a class usually holds for every class that borrows its rules. 8 of them publish no component rules of their own and are marked below; for those, the link to the parent class is read from the categories table rather than stated in the rulebook.

Legal, within limits 16 classes

All cooling system valves must be of FIXED OR AUTOMATIC type - thermostats, pressure regulators, solenoids. Manually controlled devices that alter cooling water flow while under way are prohibited in every class, as are electronic water injection systems unless of origin.


Aftermarket thermostat, pressure regulator, cooling solenoid: if the rule your class applies reads differently to you, or the rulebook has changed since this was read, ask. We answer with the section we read it from, or that we have not read it. Ask a rules question.

Every UIM class · where the rulebooks differ · signed checks on parts the shop sells.

Cooling · two and four stroke · legal outright in 16 of 24

Start
BaddJet Class Legality