BaddJet Home

Aftermarket vapour / air separator

UIM · Fuel

Aftermarket vapour / air separator

UIM answers this part for 19 of its classes. 2 of those answers are permissions, with or without limits attached, and 17 are not. 9 are inferred from how the class is written rather than quoted from a rule naming this part. 5 are inherited from a parent class the rulebook points at.


UIM says 5 cm x 15 cm; IJSBA says 2 in x 6 in (5.08 x 15.24 cm). A separator built to the IJSBA figure is marginally over the UIM one.

Where it stands, class by class

19 classes, grouped by the answer rather than listed one by one, because an answer that holds for a class usually holds for every class that borrows its rules. 5 of them publish no component rules of their own and are marked below; for those, the link to the parent class is read from the categories table rather than stated in the rulebook.

Not permitted, not listed in the rules Our reading, not a rule we can quote at you. This class requires the craft to stay stock except where the rules allow otherwise, and this part is not on the list.

No rule, this is an open class Our reading, not a rule we can quote at you. This class carries no stock clause at all, so anything unlisted appears to be open. The rulebook does not say so in terms.

Legal, within limits 1 class

Same limit. · 502.03.05-04

Legal, within limits 1 class

Modified or aftermarket, not exceeding 5 cm x 15 cm, with a return line to the tank open at all times. · 501.03.05


Aftermarket vapour / air separator: if the rule your class applies reads differently to you, or the rulebook has changed since this was read, ask. We answer with the section we read it from, or that we have not read it. Ask a rules question.

Every UIM class · where the rulebooks differ · signed checks on parts the shop sells.

Fuel · two stroke · legal outright in 2 of 19

Start
BaddJet Class Legality